Current Power Technologies diagnoses, repairs, and maintains home EV chargers across San Antonio and Houston. If your charger won’t start, charges slower than it used to, or throws an error you don’t recognize, our Licensed Master Electricians can find out why and fix it. We’re a family-owned, licensed and insured electrical contractor and a Tesla Energy Certified Installer for home Tesla Wall Connector installations, and that same training covers the service calls, not just the install.
When EV Chargers Need a Maintenance Check, We Are Here
AT A GLANCE: SERVICE SCOPE

When to Schedule EV Charger Service
Call us if your charger won’t start at all, or if charging stops partway through or seems slower than it should. A breaker that trips repeatedly or equipment that feels hot to the touch both need a look before you use the charger again.
A fault light or error code on the unit, visible damage to the cable, connector, or mounting hardware, and Wi-Fi, app, or firmware problems are all reasons to schedule a visit. It’s also worth a checkup any time you’ve had panel work, a new standby generator, solar, or other smart-home equipment added to your home, since any of those can change how your charger behaves.
What a Residential Diagnostic Visit Covers
We start by asking what you’ve noticed, when it started, and what’s changed recently. From there, we do a visual inspection of the charger, cable, connector, and mounting, followed by electrical checks on the circuit feeding it.
We also check the charger’s firmware, its Wi-Fi connection, and its app pairing, since a number of charging issues trace back to a dropped connection instead of a wiring problem. You’ll get written findings and a clear recommendation before any repair work starts.
Routine Maintenance Checklist
You can safely do some of this yourself. Take a look at the cable and connector for cracks or fraying, confirm the charger’s enclosure looks intact, and check that the app still shows your charger online.
Everything past that belongs to a qualified electrician: we check the breaker and wiring feeding the charger, verify grounding, inspect the mounting and weather sealing, confirm firmware is current, and finish with a test charge to confirm the unit performs the way it should. Don’t open an energized charger or attempt any high-voltage work yourself. That part of the job is ours.
REPAIRS, REPLACEMENT, AND MANUFACTURER WARRANTY
We can diagnose and repair most issues with your home charger’s wiring, mounting, connections, and the circuit feeding it. Some problems, like an internal component failure inside the charger itself, have to go through the manufacturer rather than through us directly.
Keep your charger’s model number, serial number, any error code it displayed, and your original purchase or installation record on hand. Having that information ready speeds up both our diagnosis and any manufacturer claim you need to file.
Tesla Wall Connector Service
As a Tesla Energy Certified Installer, we service Tesla Wall Connector installations to Tesla’s own standards, including firmware checks, app pairing, and the electrical connections behind the unit.
If you drive a different EV and charge on a universal Level 2 charger, the same diagnostic and maintenance process applies. Our Licensed Master Electricians check the equipment and the electrical work behind it either way.
After-Service Confirmation
Every service visit ends with a test charge to confirm the fix worked under real conditions. We review your charger’s settings, reconnect it to your Wi-Fi and app if needed, and walk you through what we found and what we did before we leave. You’ll get documentation of the visit for your records, including anything you should watch for going forward.
Schedule a Diagnostic Visit
Current Power Technologies services home EV chargers across San Antonio and Houston. We’re family-owned, licensed and insured, and a Tesla Energy Certified Installer for home Tesla Wall Connector installations. Call us to schedule a diagnostic visit or routine maintenance.








